The New High-Performance Roadster Based on the S 1000 RR Woodcliff Lake, NJ – November 5, 2013… Superbike riding dynamics and powerful, emotive roadster styling – these are the hallmarks of the new BMW S 1000 R. The new naked bike from BMW Motorrad is directly derived from the S 1000 RR superbike and uses the same innovative technology. The close family resemblance to the “RR” is instantly obvious. The simplified appearance of the new S 1000 R exudes an aggressive, dynamic energy. A well-thought-out overall concept, with 160 hp maximum power and a weight of 207 kg (456 lbs), as well as Race ABS, ASC and a choice of two riding modes as standard makes the BMW S 1000 R a dynamic sports roadster. In-line four-cylinder engine with optimized low to mid-range performance. When modifying the S 1000 RR’s 999 cc four-cylinder in-line engine for use in the S 1000 R, the engineers were looking in particular to provide punchy response all the way through the rpm range. To provide the ideal set-up both for everyday use and for sporty riding on the open road, they significantly increased the low and mid-range power and torque. At the same time, maximum rpm has been reduced by approximately 2,000 rpm. Maximum power of 118 kW (160 hp) is reached at 11,000 rpm and peak torque of 112 Nm (approx. 83 lb-ft) at 9,250 rpm. Up to 7500 rpm, this engine version develops 10 Newton metres (approx. 7 lb-ft) more torque than the S 1000 RR. This provides punchy low-end response that is ideal on twisty single-lane roads. Among other things, this was achieved by using redesigned cylinder head ducts, modified cam profiles and appropriately modified engine management. The new BMS-X engine management system also supports an E-Gas “throttle-by-wire” system. ASC (Automatic Stability Control), Race ABS and a choice of two riding modes as standard. Riding mode Pro with two additional modes and DTC optionally available. For optimal adaptation to different conditions and rider requirements, the S 1000 R comes with two riding modes and ASC (Automatic Stability Control) as standard. The “Rain” and “Road” modes cater to different road surface conditions using different power and torque curves, and applying different levels of Race ABS and ASC intervention. This provides an important safety bonus, particularly under variable road conditions. Dynamic Traction Control (DTC), incorporating two additional riding modes – “Dynamic” and “Dynamic Pro” – is available as a factory option. This option allows riders to make the most of the S 1000 R’s sporty performance potential both on the road and on the race track. Dynamic Traction Control, which includes a lean angle sensor, offers safe and dynamic acceleration which is currently state-of-the-art for a production motorcycle. Innovative chassis and suspension technology with large damping reserves and high-performance brakes. Dynamic Damping Control (DDC) optionally available. However ambitious the riding style, the chassis and suspension of the S 1000 R is designed to match the dynamic power delivery of the in-line-four engine. Based on that of the S 1000 RR, it uses the proven aluminum alloy perimeter frame, in which the engine forms part of the load-bearing structure. As on the RR, an adjustable upside-down fork and a dual swingarm with adjustable central spring strut support the wheels front and rear. Roadster-specific suspension requirements are met by a slight change in geometry. As on the RR, vigorous, stable and above all safe braking is provided by a braking system that comprises a twin-disc brake with two radial 4-piston fixed callipers at the front and a single-disc brake at the rear, with partially integral Race ABS. Dynamic Damping Control (DDC), available as a factory option, offers the benefits of electronic damping control which dynamically adapts the damping to the current riding situation with split-second speed. Dynamic styling. The new S 1000 R’s sports roadster personality is also mirrored in the styling. With its “tail up – nose down” stance, the S 1000 R’s appearance immediately suggests aggressive performance and dynamism. Like the RR, the S 1000 R, too, is distinctive and instantly recognizable. It has a face that stands out in a crowd. Multifunctional instrument cluster. Race-inspired features also extend to the cockpit of the S 1000 R. With an LC display with analog tachometer, the instrumentation offers an unrivalled amount of information in this segment, from the gear display and riding mode display to a lap timer. For optimal gear changes, an individually programmable shift indicator light is installed. Highlights of the new BMW S 1000 R: Well-thought-out overall concept for the sports roadster segment. Minimal styling with an aggressively dynamic look; clear family similarities with S 1000 RR. Liquid-cooled 999 cc four-cylinder in-line engine. Max. power 118 kW (160 hp) at 11,000 rpm, max. torque 112 Nm (approx. 83 ft-lb) at 9,250 rpm. 207 kg (456 lbs) curb weight with full fuel tank. Standard-equipped Race ABS for superior braking performance and safety. Standard-equipped ASC (Automatic Stability Control) for safe acceleration on surfaces with variable grip. Standard-equipped steering damper. Choice of two standard, rider-selectable riding modes, “Rain” and “Road”. Optional Dynamic Traction Control DTC with lean angle sensor maximizes both riding enjoyment and active safety in all road situations. Optional Riding mode Pro comprising two additional riding modes – “Dynamic” and “Dynamic Pro” – for road and track use. Full synchronization of Race ABS, ASC/ DTC, DDC and engine management. Innovative exhaust system with small rear silencer, front silencer, electronically controlled exhaust flap and two closed-loop, three-way catalytic converters. E-Gas (throttle-by-wire) system for optimal throttle control and maximum reliability. Suspension components with large damping reserves. DDC (Dynamic Damping Control) – electronically controlled damping system for optimal, dynamic adaptation of damping to the current riding situation and to the load the bike is carrying. Aluminum fuel tank brings further weight savings and is unique in this segment. Dynamic handling with highest standards of stability at high speeds and when braking. Multifunctional instrument cluster with extensive range of features. Extensive equipment and tailored accessories conforming to the customary high BMW Motorrad standards. Drivetrain. The S 1000 RR, which made its debut in 2009, was the first out-and-out superbike from BMW Motorrad to be powered by a four-cylinder in-line engine. It marked something of a turning point in this segment. Quickly dubbed the “RR” in the motorcycling community, the 142 kW (193 hp) superbike not only set new benchmarks in terms of performance but, with technical innovations like Dynamic Traction Control (DTC), the track-capable ABS system Race ABS and a choice of rider-selectable riding modes, it also set new standards of riding dynamics in this category. With the S 1000 R, BMW Motorrad has now taken the next logical step and tailored this innovative technology package to the sports roadster segment. Based on a well-thought-out overall concept with maximum power of 160 hp and a weight of 207 kg (456 lbs), and equipped with Race ABS, ASC and a choice of two riding modes as standard, the S 1000 R offers effortless handling and the highest levels of performance and dynamics with powerful emotional appeal. In-line four-cylinder engine derived from S 1000 RR, adapted to the special requirements of a roadster. The in-line four-cylinder engine of the new BMW S 1000 R shares many of the features of the engine that powers the S 1000 RR superbike. In the S 1000 R, however, this engine has been optimized to achieve the best fit with the requirements of a roadster. In this version the four-in-line engine develops maximum power of 118 kW (160 hp) at 11,000 rpm and maximum torque of 112 Nm (83 lb-ft) at 9,250 rpm. To provide the punchy response all the way through the rpm range that is required for sporty riding on typical single-lane roads, torque has been increased. Up to 7,500 rpm, the S 1000 R’s engine offers up to 10 Newton meters (7 lb-ft) more torque than the S 1000 RR, which is tailored more to maximized power and track performance. Once again, the 999 cc four-cylinder in-line engine, which has a bore/stroke ratio of 49.7 to 80 millimeters, uses a valvetrain with small, lightweight single rocker arms. In combination with a short, toothed, sprocket-driven camshaft timing chain, this provides maximum rpm stability and precise valve timing. As on the S 1000 RR, mixture formation is based on fully sequential, cylinder-selective fuel injection with two injectors per cylinder. For use in the S 1000 R, the high-performance engine incorporates a number of modifications. For even better low and mid-range volumetric efficiency, the cylinder head ducts have been redesigned and the valve lift curves have been modified. Maximum rpm is around 2,000 rpm lower than on the S 1000 RR, at 12,000 rpm. The motorcycle also uses the new BMS-X engine management system (S 1000 RR: BMS-KP), which supports a full E-Gas throttle-by-wire system. As on the S 1000 RR, cylinder-selective anti-knock control is also featured. Ignition coils with integrated igniter and new sensors for both overhead camshafts are further modifications on the engine electrics and electronics front. The high-grade stainless-steel exhaust system incorporating an exhaust flap with reduced weight and enhanced acoustics meets the most stringent noise and emissions standards without sacrificing power output. It also includes a small, attractively styled rear silencer. As on the S 1000 RR, on the S 1000 R the power is managed by a constant mesh six-speed gearbox and an O-ring roller chain. The S 1000 R, too, can be equipped with the optional HP Gear Shift Assistant, which allows clutchless upshifting with minimal torque interruption. Automatic Stability Control (ASC), Race ABS and two riding modes as standard. Riding mode Pro with two additional riding modes and DTC optional. The S 1000 R comes with two riding modes and ASC (Automatic Stability Control) as standard, for optimal adaptation to different conditions and rider requirements. The standard “Rain” and “Road” modes allow the S 1000 R’s riding characteristics to be matched to road conditions. The standard-equipped, partially integral Race ABS, together with ASC, significantly increase the sporty roadster’s versatility and provide an important safety and performance bonus, particularly under variable road conditions. These functions can be activated or disengaged on the fly. In “Road” mode, Race ABS and ASC are set up for dry road conditions and optimal throttle response is ensured. In “Rain” mode, the motorcycle is set up for low-grip road conditions, particularly for wet weather. Throttle response is softer and Race ABS and ASC intervene sooner, in line with the conditions. In this mode, maximum power is limited to 100 kW (136 hp) at 9,500 rpm and torque to 104 Nm (77 lb-ft) at 9,000 rpm. The Riding mode Pro option adds two further riding modes, “Dynamic” and “Dynamic Pro”, on top of the standard specification. Riding mode Pro is included in the DTC (Dynamic Traction Control) option. In conjunction with Riding mode Pro, the standard ASC is replaced by DTC with integrated lean angle sensor. The “Dynamic” mode is designed for sporty operation on dry roads. The engine is set up for direct throttle response and the Race ABS thresholds are higher. Rear-wheel lift-off detection is disabled as well, while the Dynamic Traction Control (DTC) thresholds are higher for a more dynamic riding style. The “Dynamic Pro” mode (activated by a coding plug) is intended for extra-sporty track riding. In this mode, Race ABS operates without rear wheel lift-off detection and does not intervene in rear-wheel braking. This allows experienced riders to drift into bends. DTC interventions are likewise set up for extra-sporty riding in high-grip conditions. The front wheel lift-off detection allows for wheelies, which are up to the rider to control. Chassis and Suspension. Innovative suspension technology for sporty, agile roadster enjoyment. Like its engine and electronic control systems, the BMW S 1000 R’s chassis and suspension are also based on the proven technology of the S 1000 RR. The chassis design is centered on the aluminum perimeter frame which weighs just 11.98 kg (26.4 lbs) and incorporates the 32-degree, forward-inclined engine as part of its load-bearing structure. With a curb weight of 207 kg (456 lbs) with full fuel tank, the new S 1000 R is one of the lightest bikes in its category. This alone, however, goes only part-way towards explaining the S 1000 R’s effortless handling, excellent balance and precise riding characteristics. More significant in this respect are the optimized center of gravity achieved through extensive testing and the suspension geometry. For example, the castor angle of 65.4 degrees is 0.8 degrees more raked and the trail of 98.5 millimeters (3.88 inches) is 5 millimeters (0.20 inches) longer than on the RR. Wheelbase has been increased by 22 millimeters (0.87 inches) to 1,439 millimeters (56.7 inches). All these measures not only increase traction and stability but also steering response and comfort. Adjustable suspension components with large damping reserves. As on the RR, the front wheel is located by an upside-down fork with 46mm diameter fixed tubes. The upside-down fork features inner cartridge inserts, i.e. a separate hydraulic piston-cylinder system which allows compression and rebound damping to be adjusted. If equipped with the optional DDC, spring preload too can be adjusted. Total front-wheel suspension travel is 120 millimeters (4.7 inches), the same as at the rear, with 70 millimeters (2.7 inches) of positive and 50 millimeters (2.0 inches) of negative travel. The S 1000 R’s rear-wheel location likewise contributes to the excellent riding dynamics, featuring a central spring strut with adjustable spring preload and adjustable compression-stage damping. The spring strut is located by a compact, lightweight kinematic system. Total rear-wheel suspension travel is 120 millimeters (4.7 inches), with 80 millimeters (3.1 inches) of positive and 40 millimeters (1.6 inches) of negative spring travel. Dynamic Damping Control DDC available as a factory option – damping adapts on the fly to the current riding situation. The excellent suspension quality already offered by the S 1000 R in standard specification can be further increased with the optional Dynamic Damping Control system (DDC), first introduced on the HP4 in 2012. With this system, the compression and rebound damping stages are linked to the relevant riding mode. They are additionally adapted dynamically to the current riding situation, for example to fast steering changes on a series of bends or to uneven road surfaces. This electronic damping control system responds automatically to maneuvers like braking, accelerating or cornering, and to changes in road conditions, adapting the damping by means of electronically controlled damping valves. The basic settings of the Dynamic Damping Control system (DDC) are synchronized with the “Rain”, “Road”, “Dynamic” and “Dynamic Pro” modes, which are conveniently selectable by the rider at the press of a button. In “Rain” and “Road” mode, the DDC set-up provides the plush, comfortable damping most suitable for operation on typical single-lane roads, whether on poor or good surfaces. In “Dynamic” mode, the damping provides a certain amount of tautness, while in “Dynamic Pro” mode the DDC set-up is more closely geared to maximized performance and supports a very sporty riding style, whether on the road or on the track. The taut damping gives the rider crystal-clear feedback on the riding situation at all times. The damping settings can be adjusted when the bike is stationary or on the move. The adjustment is implemented in fractions of a second by an electronically controlled valve with variable annular gap, which varies the flow cross-section for the damping oil. This ensures optimal compression and rebound damping in all riding situations. Compromises on suspension set-up are therefore a thing of the past. At the same time the DDC also provides maximum traction for optimal translation of engine power into acceleration. Lightweight, stiff aluminum wheels. The dynamic persona of the new S 1000 R is also mirrored in the styling of its wheels. These intricate, dynamically styled 10-spoke die-cast aluminum wheels are also used on the S 1000 RR. In the quest for the lightest possible design, the brake discs are not separately mounted, which would involve additional bolted connections. Instead, the brake disc rings are directly mounted to the specially designed wheel hub. The special design of these wheels means they are still among the lightest in their segment. Sizes are 120/70 ZR 17 at the front and 190/55 ZR 17 at the rear. High-performance brakes, partially integral Race ABS and steering damper fitted as standard. The new S 1000 R’s brake system has been directly adopted from the S 1000 RR superbike and is therefore fully matched to the high-performance drivetrain and suspension. Front braking is provided by a twin-disc brake with two radial four-piston fixed calipers and two floating steel brake discs with 320-millimeter diameter and 5-millimeter thickness. The steel-mesh-wrapped, pressure-resistant brake lines provide optimal transmission of the braking power from the hand-operated brake lever. Rear braking is provided by a hydraulically actuated single-disc brake with single-piston floating calliper. The rigidly mounted steel brake disc has a diameter of 220 millimeters and a thickness of 5 millimeters. Here too, steel-mesh-wrapped brake lines are used. A very clear pressure point, excellent braking action, clearly controllable modulation plus maximum temperature stability are hallmarks of the S 1000 R brake system not only on the road but also, when required, on the race track. Maximum active braking safety is provided by the standard-equipped, partially integral BMW Motorrad Race ABS. With this system, the handbrake controls both the front and the rear wheel brakes, and the footbrake lever controls just the rear wheel brake. In conjunction with the rider-selectable riding modes, three different Race ABS characteristics are also selected. These are combined with, and for maximum safety, fully synchronized with the riding modes. With a weight of just 1.56 kg (3.44 lbs) for the controller and a total weight of less than 2.5 kg (5.5 lbs), this system is among the lightest in the market. For special requirements, Race ABS can be separately deactivated. Although Race ABS is a valuable support for the rider and provides huge safety benefits when braking, it can only act within the laws of physics. It is still possible to fall foul of these laws through rider misjudgements or errors, which in extreme cases can result in a fall. Race ABS does, however, help the rider to use the braking performance of the S 1000 R significantly more efficiently and therefore more safely. The new S 1000 R is also equipped with a steering damper. Electronics. Multifunctional instrument cluster with extensive range of features. The instrument cluster of the S 1000 R features a large LC display and an analogue, easy-to-read tachometer. As well as the currently engaged gear, the currently selected riding mode (“Rain”, “Road”, “Dynamic” or “Dynamic Pro”) is also displayed. It is possible, using the control at the right-hand end of the handlebars, to switch between the different riding modes either while stationary or on the fly, provided the accelerator twist grip is shut down first. The instrument cluster of the S 1000 R offers an unrivalled range of functions in this segment. For example, the rider can switch the display to track mode in order to see details of the current, best or last lap time. It is even possible to display the time, per lap, for which the brakes were applied, the accelerator position in percentage per lap and the number of gear shifts per lap. If the HP infrared lap timer accessory is ordered, riders can also make precise time measurements for subsequent data analysis. A shift indicator light, which is adjustable for brightness, frequency (4 and 8 Hz) and for choice of shift points in the range 7,000 rpm to 12,000 rpm, allows the rider to hit the shift point very precisely. The instrument cluster comprises the following displays: tachometer, speedometer, gear display, riding mode, total mileage, engine temperature, fuel level, remaining range (from start of trip), Trip 1, Trip 2, average fuel consumption, average speed, lap timer, shift indicator light, time of day, best lap in progress. If the relevant options have been ordered, also: heated grips, DDC and cruise control. Styling and color concept. Dynamic design and sporty ergonomics. In its design, the new S 1000 R shows clear similarities with its superbike counterpart, the S 1000 RR, although in this case the styling is moulded to the requirements of a sports roadster. Visually, the S 1000 R stands out very clearly from its competitors and its “tail up – nose down” stance gives it a particularly aggressive, dynamic look. The low front end and a high tail that is even more striking than on the RR, give the S 1000 R a look of grace and effortlessness. The deep headlight cover and the high, angular tail suggest an animal about to spring. In front view, the asymmetrical headlights and the large central air intake are clear evidence of the DNA inherited from the RR. The new S 1000 R also offers an instantly recognizable and unmistakable front view and is a face that stands out from the crowd. Compared with the S 1000 RR superbike, the design language of the S 1000 R is more simple and sharply defined. For example, the opening on the cooling air exit side is powerfully styled and dynamic on the S 1000 R, while on the left side, gill-shaped air outlets create a more defined and dynamic look. The covers of the airbox and aluminum tank are neatly integrated into the overall design. On the S 1000 R, as well as sportiness and dynamism, development also focused on one of the traditional virtues of BMW motorcycle design: perfect ergonomics. With its low seat height of 814 mm (32.0 inches), the S 1000 R is well suited to all roadster fans. A wide, tapering, aluminum handlebar with forged handlebar clamp brackets makes for a relaxed upper body posture and the redefined footrest positions result in a leg position which is both sporty and also comfortable. As a result, the S 1000 R provides a relaxed seating position for sporty riding on the open road which is nevertheless comfortable on long-distance trips. Color scheme. The sporty and dynamic personality of the new BMW S 1000 R is echoed in the three different available colors. The S 1000 R is available in Racing red non-metallic, Frozen dark blue metallic and Light white non-metallic paintwork. Racing red non-metallic paintwork gives the new S 1000 R a particularly sporty and aggressive appearance. With the prominently positioned “R” logo on the fuel tank, it underlines the bike’s status as a top performer in the sports roadster segment. Frozen dark blue metallic stresses the elegant, high-tech character of the S 1000 R. Here sportiness and dynamism are combined with a sumptuousness that highlights the bike’s engineering to maximum effect. With Light white non-metallic paintwork, the new S 1000 R takes the corporate design colors of BMW Motorrad as its inspiration and combines sportiness with refinement. This paint scheme gives the sporty roadster a particularly light and agile appearance. Equipment Range. Options and accessories for additional customization. For additional customization, the S 1000 R is available with the usual extensive range of BMW Motorrad options and accessories. Options are supplied directly from the factory and are integrated in the production process. Accessories can be retrofitted by the BMW Motorrad dealer or customers themselves. Options. • Sports package with Dynamic Traction Control (DTC), Riding mode Pro (“Dynamic”, “Dynamic Pro”), gear shift assistant and cruise control. • Dynamic package with Dynamic Damping Control (DDC), heated grips and small engine spoiler in matching bike color. Accessories. Safety/performance. • DTC and Riding mode Pro. • Cruise control. • Engine crash pads. • Axle sliders. • Anti-theft alarm system. Storage. • Tank Bag. • Rear Tailbag. Design. • HP Carbon tank cover left/right. • HP Carbon airbox cover. • HP Carbon front mudguard. • HP Carbon rear mudguard. • HP Carbon chain guard. • Tail cover. • Engine spoiler. • HP Race Cover Kit. Sound. • HP full titanium exhaust system 4.5 kg (9.9 lbs) lighter than the standard system. • Akrapovic sports silencer. Ergonomics and comfort. • HP Race footrest plate. • HP Race rider footrest system. • HP pillion footrests. • HP gear shift assistant. • HP folding clutch lever. • HP folding handbrake lever. • Sport windscreen. • Rider’s comfort seat. • Pillion seat with enhanced comfort. • Heated grips. Navigation and Communication. • BMW Motorrad Navigator. • Navigator cradle, cable and mounting kit. Maintenance and technology. • HP lap timer. • HP Race data logger. • HP forged wheels. • Sport work stand. • Swingarm adapter for Sport work stand. • Motorcycle cover. • HP tire warmers. • HP brake remote adjustment. • HP Race pit-stop carpet. Rider’s accessories. • Sport suit. • Sport boots. • 2 in 1 gloves. • and more BMW Group In America BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and the Rolls-Royce brand of Motor Cars; DesignworksUSA, a strategic design consultancy in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group’s global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 338 BMW passenger car and BMW Sports Activity Vehicle centers, 139 BMW motorcycle retailers, 119 MINI passenger car dealers, and 34 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey. More, from a press release issued by BMW Group North America: Raising the Bar, Once Again, for Dynamic Touring Bikes Woodcliff Lake, NJ – November 5, 2013…The introduction of the new BMW R 1200 RT raises the bar, yet again, for dynamic touring bikes. The initials RT have always been synonymous with supremely comfortable, highly dynamic touring on two wheels. With its latest rendering in the form of the R 1200 RT, featuring a new engine and unique profile, BMW Motorrad is, once again, showing how things are done when it comes to fusing effortless travel abilities with sporty performance. More powerful boxer engine with larger centrifugal mass for even greater refinement and smoothness. Derived from the boxer engine on the BMW R 1200 GS, the new engine produces a peak output of 92 kW (125 hp) at 7,750 rpm and its maximum torque of 125 Nm (92 lb-ft) at 6,500 rpm. On the new R 1200 RT, the centrifugal masses of both the crankshaft and the alternator were increased, resulting in an even smoother engine. Riding comfort has been improved by using a longer secondary transmission ratio to keep the engine rpm lower. ASC and two riding modes as standard. Riding mode Pro with Hill Start Control is available as a factory option. For optimum adaptation to the rider’s individual needs, the new R 1200 RT is equipped as standard with two riding modes along with Automatic Stability Control (ASC). The two riding modes, “Rain” and “Road”, allow the R 1200 RT to be adapted to most road conditions. The optional extra Riding mode Pro, meanwhile, includes the additional riding mode “Dynamic” plus the Hill Start Control function. The sporty nature of the R 1200 RT can be experienced to the full in “Dynamic” mode, while Hill Start Control helps to make light work of stopping and starting on an uphill slope. Gear Shift Assistant Pro for smooth yet quick gear changing. The BMW Gear Shift Assistant Pro, available as a factory option, represents a world first for production motorcycle manufacture. It enables upshifts and downshifts to be made without operation of the clutch or throttle valve in the proper load and rpm speed ranges while riding. Even more agile chassis offering superior handling precision and comfort. Dynamic ESA for optimum riding dynamics in any situation is available as a factory option. The new R 1200 RT features a new, continuous main frame to give it even greater directional stability. And when equipped with the optionally available semi-active suspension, BMW Motorrad Dynamic ESA (Electronic Suspension Adjustment), the new R 1200 RT attains unprecedented levels of riding safety, performance and comfort, with the damping automatically adapted to the prevailing conditions to suit individual riding situations and maneuvers. Optimized comfort, streamlined aerodynamics, more dynamic bodywork and optional LED Corona Ring feature Headlight. Seating comfort and ergonomics have also been enhanced for rider and passenger alike. The ergonomic triangle formed by the handlebars, seat and footrests has been lowered by 20 millimeters (0.8 inches) to make it even easier to reach the ground, something that all riders and passengers will appreciate when maneuvering in tight spots or getting on and off the bike. Thanks to their outstanding comfort and effective wind and weather protection, BMW RT models have always been renowned for their excellent long-distance capabilities, now further improved by the addition of an optimized windshield. The front headlight assembly lends the new R 1200 RT a highly dynamic appearance and the optional LED Corona Ring feature gives the new RT an even more appealing appearance that is distinctively BMW. Multifunctional instrument cluster with TFT color display, BMW Motorrad Pro onboard computer and innovative audio controls. The instrument cluster has undergone a complete makeover, with the new R 1200 RT now featuring a large 5.7-inch TFT color display to provide the rider with an even greater wealth of data. This is where the extensive information from the standard equipped BMW Motorrad Pro onboard computer can also be selected. The display is supplemented by the analogue speedometer and tachometer dials. And for the ultimate in touring comfort, the list of available factory installed options includes an audio system with innovative operation via the multi-controller. New color scheme in three appealing variants. The RT’s dynamic appearance is enhanced as a result of three new color compositions: Quartz Blue Metallic, Callisto Grey Metallic Matt and Ebony Metallic. Highlights of the new BMW R 1200 RT: Air/liquid-cooled twin-cylinder boxer engine with a displacement of 1,170 cc. Output 92 kW (125 hp) at 7,750 rpm, maximum torque 125 Nm (92 lb-ft) at 6,500 rpm. Crankshaft and alternator with increased centrifugal mass for even smoother engine running. Two riding modes (“Rain” and “Road”) plus Automatic Stability Control (ASC). Riding mode Pro with “Dynamic” riding mode and Hill Start Control as an option. Gear Shift Assistant Pro as an option for added comfort and speed when changing gear. New chassis with a continuous frame that is even more agile and more comfortable. Semi-active suspension Dynamic ESA (Electronic Suspension Adjustment) as an option. New bodywork in more dynamic design. Optimized comfort and aerodynamics. New, adjustable windshield for even better wind and weather protection. New headlight concept with optional LED Corona Rings. Multifunctional instrument cluster with large TFT color display. BMW Motorrad Pro onboard computer offering a wide range of information. Innovative audio controls. New colors. Options and accessories made to BMW Motorrad’s customary high standards of quality. Drivetrain It was more than 35 years ago when one of the most powerful sets of BMW Motorrad initials first appeared – RT, a touring bike unprecedented in form, offering supreme comfort out on the road. Ever since, the BMW RT has reigned as the quintessential choice for highly comfortable and dynamic touring on two wheels. The latest incarnation of this innovatively appointed, high-performance tourer – the R 1200 RT – has been thoroughly optimized all round and equipped with a new engine to make it even more adept at long-distance travelling combined with excellent riding dynamics. New boxer engine with higher centrifugal mass for even smoother running characteristics and supreme touring comfort. The new flat twin boxer engine is basically the same as the DOHC power unit on the BMW R 1200 GS. Prior to being installed in the R 1200 RT, however, it was first carefully tailored to the specific requirements of a touring bike. It produces an output of 92 kW (125 hp) at 7,750 rpm and musters its peak torque of 125 Nm (92 lb-ft) at 6,500 rpm. Not only does the new engine generate considerably higher torque than its predecessor over the entire rev range, but torque delivery is more uniform as well: over 100 Nm (74 lb-ft) is constantly on tap throughout the usable rev band. This has the effect of improving accelaration at all engine speeds and further enhancing the sense of effortless engine power that is so important on a tourer. Like the engine on the outgoing model, the new 1,170 cc unit still employs air/liquid cooling, but with water instead of oil as the cooling agent. Water’s higher heat absorption capacity ensures more efficient heat dissipation, resulting in even greater thermal stability on long trips. With this system of precision cooling, only the parts of the engine that are particularly exposed to thermal stress are cooled by the coolant. The engine continues to be air cooled too, thereby preserving the characteristic appearance of the boxer drive unit. The flow through the cylinder heads is now vertical, while the six-speed gearbox as well as a light-action oil bath clutch with anti-hopping function have been incorporated into the engine housing for the first time on a BMW Motorrad boxer engine. The secondary drive runs via the maintenance-free cardan drive shaft that is now placed on the left-hand side. The centrifugal masses of both the boxer engine’s crankshaft and the alternator were increased in preparation for use on the new R 1200 RT to ensure yet smoother engine performance with even more comfortable running characteristics. The reduced powertrain vibrations help to produce a pleasant, fatigue-free riding experience on long journeys in particular. The longer secondary transmission ratio also helps to ensure greater comfort by allowing the boxer engine to run at a lower rev speed. The even more sensitive throttle response of the new BMW R 1200 RT is another indication of how its drive system has been further refined. The throttle twist grip’s reduced operating angle and lower return forces are an additional boon to riding comfort. Last, but not least, the R 1200 RT has also been injected with added dynamism. Tractive power has been upped substantially compared to its predecessor, allowing it to power out of bends with even greater urgency, while its engine revs much more freely than before, too. ASC and two riding modes as standard. Riding mode Pro with Hill Start Control is available as a factory option. For optimum adaptation to the rider’s individual needs and the intended use, the new R 1200 RT already comes equipped as standard with two riding modes, together with the traction-enhancing Automatic Stability Control (ASC) for increased riding safety. The riding characteristics can be adapted to most road conditions with the help of the two standard riding modes, “Rain” and “Road”. Together with the ABS system, another standard feature, ASC substantially increases the range of use of the new R 1200 RT, while providing a significant safety boost on slippery surfaces. In “Road” mode, the control systems are set to provide an optimum balance of performance and comfort on all roads. When “Rain” mode is activated, the bike is set up for road conditions offering low grip. In this mode the throttle response also becomes gentler. The control systems are triggered sooner, while the damping of the spring struts is softer to suit the conditions. The optional Ride Mode Pro, meanwhile, includes the additional riding mode “Dynamic” plus the Hill Start Control function. The sporty side of the new BMW R 1200 RT can be experienced to the fullest in “Dynamic” mode. Instant throttle response, restrained intervention from the ASC and ABS and a firm damping set-up for the Dynamic ESA (when equipped as a factory option) let the bike unleash its full performance potential. The new Hill Start Control function is a brand new innovation, allowing the rider to effortlessly come to a stop on uphill slopes with the engine running without having to keep the brake lever pressed. This makes it far easier to perform hill starts and is a particularly valuable aid on a fully laden tourer. Thanks to the semi-integral ABS braking system, the rear brake can be operated individually for this purpose. When the Hill Start Control is activated, pressure is built up in the rear wheel’s hydraulic brake unit to hold the motorcycle steady on an incline. The Hill Start Control is purely a comfort feature that is designed to facilitate stopping and starting on a hill and is not to be confused with a parking brake. Optional Gear Shift Assistant Pro for changing gear with virtually no interruption in power flow. The BMW Gear Shift Assistant Pro is another world first for production motorcycle manufacture. Compared to the Gear Shift Assistant already featured on the superbike models such as the BMW S 1000 RR, the system’s functionality has been extended for use on the new R 1200 RT and adapted to the specific requirements of a touring bike. The Gear Shift Assistant Pro enables upshifts and downshifts to be made without operation of the clutch or throttle valve in the load and rev speed ranges that are of relevance to riding, both increasing comfort for the rider and providing an added touch of dynamism. The majority of gear changes can be carried out with the help of the Gear Shift Assistant – starting off is one of the few exceptions to this. When accelerating, the throttle valve no longer needs to be closed for gear changes, allowing the power to flow with barely any interruption. And when decelerating and shifting down a gear (throttle valve closed), automatic double-declutching is used to adjust the engine speed. Gears are engaged in the usual way with the footshift lever. Shift times are considerably faster compared to gear changes with operation of the clutch. The Gear Shift Assistant is not an automatic shift system, but rather just an aid for changing gear. When gear changes are carried out with the help of the Gear Shift Assistant, the cruise control is automatically deactivated for safety reasons. The system works by employing a sensor on the gearbox output shaft to detect the rider’s shift request and trigger the assistance mechanism. By increasing or reducing engine torque by the required amount, the load on the powertrain is effectively eliminated to allow the shift dogs of the next gear wheel pair to intermesh in the same way as when the clutch is used. No gear shift assistance is provided when changing gear while operating the clutch, or when shifting up with the throttle valve closed (overrunning) or when decelerating. Neither will any assistance be given if the shift lever is not in its proper starting position when shifting up or down. Assistance is available when downshifting with the throttle valve open, but this can provoke severe load change reactions, particularly in low gears. The same effect may be produced when changing down without operating the clutch while cruising at a constant speed. BMW Motorrad therefore recommends always using the clutch to change gear in these riding situations. Riders should also avoid using the Gear Shift Assistant at rev speeds close to the red line. Chassis. Innovative new chassis for even greater agility accompanied by increased comfort. The new BMW R 1200 RT is built around a chassis which, like the engine, is based on the proven components equipped on the R 1200 GS. The new frame with mountings for the BMW telelever and BMW paralever now features a continuous design to make it more rigid, resulting in a further major improvement in the directional stability of the R 1200 RT. By stiffening the mounting for the spring elements, the chassis response is more sensitive with improved feedback for the rider. The large steering angle of 36 degrees to each side results in a very tight turning circle by tourer standards, enabling easy, straightforward maneuvering. By optimizing the position of the bike’s center of gravity, handling is now even sharper than on the previous model, which was already outfitted for very keen performance. What’s more, the ride has been made even more precise to generate even greater handling reserves when putting the bike’s sporting abilities to the test. With BMW Evo paralever rear suspension, the lower spring strut area with wraparound swingarm is now also better protected against possible damage. Finally, delicately styled 10-spoke wheels give added impact to the dynamic element of the R 1200 RT. BMW Motorrad Dynamic ESA semi-active suspension for optimum riding dynamics in any situation is available as a factory option. The semi-active suspension BMW Motorrad Dynamic ESA (Electronic Suspension Adjustment) maximizes riding safety, performance and comfort. Spring travel sensors at both the front and the rear monitor the vertical movements of the respective wheel suspension as well as collect further data, allowing the damping to be automatically adapted to riding situations and maneuvers. Dynamic ESA is integrated into the riding mode control concept. It includes the same basic settings already familiar from the previous BMW ESA system for programming the damping level (soft, normal, hard) and load status (rider, rider with luggage, rider and passenger). As with the more advanced ESA II version, the spring preload and spring rate can also be adjusted. This alone is sufficient to ensure that the rider is able to enjoy optimum roadholding with highly communicative feedback irrespective of the load being carried. The new BMW Dynamic ESA system offers a significant boost to safety by modifying the suspension set-up in such a way when braking and accelerating that the bike’s attitude on the road remains virtually unchanged while directional stability is greatly enhanced. As well as increasing safety and comfort, this also has the effect of making the R 1200 RT a real thrill to ride. Electronics. Multifunctional instrument cluster with large TFT color display. The high degree of design that has gone into the R 1200 RT is immediately apparent from a look at its instrumentation. Apart from analogue gauges for the road speed and engine speed as well as the customary warning and indicator telltale lights, the restyled instrument cluster also incorporates a large 5.7-inch TFT color information display. This display continues to be something of a milestone for the motorcycle industry, in terms of both its design and its execution, with the high luminosity and outstanding contrast making sure it is easily readable. The display’s high resolution is also ideal for neatly presenting several lines of text or graphics. It combines with the standard multi-controller to provide riders of the new R 1200 RT with a peerless operating system offering an array of handy functions. To ensure optimum viewing conditions and readability, the display unit can be moved to two positions for tilt (+/- 5 degrees). BMW Motorrad Pro onboard computer with extensive information as standard. The BMW Motorrad Pro onboard computer included as standard ups the ante for comfort and convenience in the touring segment with a number of functions that cannot be found on any of its competitors. It puts a wealth of useful information at the rider’s fingertips, ranging from the oil level to the voltage of the onboard electrical system to a gear shift indicator. The menu structure has been designed for the specific demands of motorcycling, just as it was on the BMW K 1600 GT and GTL. It has a flat hierarchical structure and can be safely operated by riders using the multi-controller without having to take their eyes off the road. The same is true when it comes to controlling the navigation system that is available as an accessory – dispensing with the need to operate it via the touchscreen while on the move. Riders are also able to simply program the “favorite” button with a function of their choice for direct access. The following data can be called up via the BMW Motorrad Pro onboard computer: Total mileage, distance covered, trip meter 1+2, automatic trip meter (reset after a break of 6h), ambient temperature including ice warning at temperatures below 3 °C (37 degrees F), average fuel consumption 1 + 2, average fuel consumption since reset, current fuel consumption, average fuel consumption for range calculation, range, current speed, average speed, oil level, Tire Pressure Monitor with optional TPM, onboard electrical system voltage, date, break time, riding time, service date, distance to service. Dynamic front headlight assembly comprising a main low-beam headlight and two high-beam headlights as standard, plus LED Corona Rings as an option. The front headlight assembly on the new R 1200 RT lends the machine a distinctly dynamic appearance. The main headlight unit in the center is flanked by two high-beam headlights on the left and right, resulting in outstanding illumination of the road ahead. If it should ever be necessary to lower the headlight beam despite adjustment of the suspension – when the bike is heavily laden for instance – this can easily be done with the help of a handy knob on the bottom of the unit. The optional Headlight Pro, featuring Corona Ring lighting, illuminates with the brightness of sidelights. LED technology is already used as standard for the rear light as well as the front and rear turn indicators, combining with the clear white lenses to give these details of the R 1200 RT a high-tech, sophisticated and dynamic look. The indirect LED lighting that is fitted instead of individual diodes with direct light output is the only type of its kind in the motorcycle industry. Optional audio system with Innovative audio controls. The audio system featured on the new R 1200 RT employs the same technology as the BMW K 1600 models, meaning that it already boasts a series of innovative functions that are unrivalled in the motorcycle market, such as operation via the multi-controller, a control interface for Apple iPod and MP3 players/USB, a Bluetooth connection to both rider and pillion passenger, as well as the ability to receive Sirius XM satellite radio (USA and Canada only). The addition of the 5.7-inch TFT color display has significantly enhanced both the range of functions and ease of use compared to its predecessor. In the case of the new audio system, for instance, there are now just four buttons in the audio control panel instead of the previous eight, as the remaining functions can be operated with the multi-controller. Thanks to a newly developed bass tube, it has been possible to bring about a further improvement in the audio system’s already impressive sound quality without having to enlarge the fairing’s outer contour. Convenient central locking with anti-theft alarm system available as a factory option. The central locking system on the R 1200 RT locks both panniers, the storage compartment, the audio compartment and the accessory topcase simultaneously and can be conveniently operated using either the radio remote control or a pushbutton control on the end of the right handlebar. The panniers continue to be detachable; and the servo motors for the locking mechanisms are located in the motorcycle’s body with the pannier locks secured mechanically by means of a locking bolt. Due to installation requirements and the space available on the new R 1200 RT, the central locking can only be ordered as an option in conjunction with the optional anti-theft alarm system, with which it shares its housing. The anti-theft alarm system, however, continues to be available individually as an accessory. Body and Design. New, more dynamic bodywork with streamlined aerodynamics, optimized wind and weather protection and a host of practical details. The BMW R 1200 RT is the classic tourer from BMW Motorrad. From the very outset, the initials RT have symbolized unconditional long-distance capabilities rooted in reliability, functionality, supreme comfort and optimum wind and weather protection for the discerning touring rider. All this is reflected in the design of the new R 1200 RT, as well. The aerodynamically sculpted surfaces follow an intelligent configuration, while the motorcycle as a whole exudes a powerful and dynamic presence. Its agile, light and fluid form is accentuated by the harmonious interplay of colored and transparent surfaces. The silhouette of the new BMW R 1200 RT extends from the dynamically styled, expressive front end over the stretched flyline all the way to the rear. Integrated into the flyline are a low Comfort seat and an ergonomically shaped touring tank with a pronounced knee grip area. The elegantly designed panniers and accessory topcase blend in harmoniously with the coherent overall composition of surfaces and lines. As such, the R 1200 RT signals at first glance its commitment to relaxed touring even over long distances. When viewed from the front, the R 1200 RT is instantly recognizable as belonging to the BMW Motorrad family. The headlight constitutes a striking eye-catcher on the front end, underlining the hallmark BMW Motorrad “split face”. With two round reflectors on the outside and an elongated reflector in the center, it displays the typical face of a BMW tourer and ensures an unmistakable look by day as well as by night. When it came to linking the motorcycle front with the side fairing, the designers achieved an exceptionally lightweight look thanks to an air duct that makes the front appear to be floating above the side fairing. An integrated fender rounds off the dynamic vehicle concept at the front end. Practicality, comfort and convenience as well as wind and weather protection have also benefited from significant improvements in the new R 1200 RT. Take the power-adjustable windshield, for example, which now reduces the amount of drag acting on the rider far more effectively despite offering exactly the same adjustment range as its predecessor. It minimizes wind noise too, and is the quietest windshield yet from BMW Motorrad. What’s more, the memory function with anti-trap protection allows the windshield to be automatically lowered when the ignition is switched off, giving the bike a highly dynamic look even when it’s parked. Compared to the outgoing R 1200 RT, the rear-view mirrors are now smaller in size. Nevertheless, their lower, wider positioning has actually enlarged the field of vision. By enhancing the rider’s all-round view, the new rear-view mirrors help to ensure a safe and pleasant journey. They are mounted on the fairing and thus also provide protection for the hands, while the indicators are now integrated into the mirror stalks. And for the first time, the mirrors are foldable, too – they fold inwards towards the rider, which can come in very useful when transporting the bike or parking it in a garage. The standard-fit, waterproof and lockable storage compartment can be found inside the fairing on the left and is also able to comfortably accommodate the BMW Motorrad Navigator if required. Opposite on the right, an additional storage compartment has been included for holding a USB stick, Apple iPod or other music storage device if the optionally available audio system is installed. Greater comfort, optimized ergonomics and new, adjustable seat variants. Apart from the excellent suspension, rider and passenger also benefit from a further improvement in both seating comfort and ergonomics. The ergonomic triangle formed by the handlebars, seat and footrests has been lowered by 20 millimetres (0.8 inches) on the new R 1200 RT so that it is even easier to reach the ground. This means that, besides the rider’s seat, the handlebars and footrests have also been positioned at a lower height, without affecting either the bike’s leaning ability or the sense of comfort. The pillion seat, together with the footrests, has also been lowered by 20 millimeters (0.8 inches), heralding a significant gain in comfort for passengers, especially when getting on and off the motorcycle. The rider’s seat is now 2 cm (0.8 inches) longer and the pillion seat 1 cm (0.4 inches) longer, a useful extension in length that results in more comfort compared to the previous model. Apart from the height-adjustable standard seat (seat height 805 / 825 mm; 31.7 / 32.5 inches), two further seat variants are available as no cost options to cover the wide-ranging requirements of both rider and passenger: the high seat (830 / 850 mm; 32. 7/ 33.5 inches) and the low seat (760 / 780 mm; 29.9 / 30.7 inches). The low seat therefore comes close to the sort of seat height that could previously only be achieved on the R 1200 RT by selecting the low suspension option (including one-piece, non-adjustable seat without seat heating and not available in conjunction with the optional ESA). To allow use of the stowage space in the motorcycle’s rear, the mounting for the pillion seat on the new R 1200 RT has been designed so that the seat can be removed and attached again without the need for any tools. Colors. The dynamic look of the new BMW R 1200 RT is intensified by the color scheme, featuring three new color compositions. It is available in the following finishes: Quartz blue metallic or Callisto grey metallic matt, each combined with the contrasting color Dark slate metallic matt, and the third color option Ebony metallic, which is combined with Monolith metallic matt as the contrasting color. The seat is colored black on all variants. The Quartz blue metallic finish gives strong emphasis to the dynamism and agility of the R 1200 RT, while also underlining the fact that it leads the way for class and quality in its segment. Callisto grey metallic matt brings out the dynamic character of the R 1200 RT to even more striking effect. It lends the machine an almost sporty aura, while still retaining its sense of elegance. The Ebony metallic variant, meanwhile, brings out the bike’s elegant, high-class character more and seems to emphasise its comfort without losing the impression of lightness. It is refined and exclusive, without being overly conservative. Equipment Range. Optional equipment and accessories . An extensive range of optional equipment and accessories is available for further personalization of the new BMW R 1200 RT. Factory Options are integrated into the production process. Accessories are retrofit items that can be added by BMW Motorrad dealers or customers themselves. Optional equipment . Gear Shift Assistant Pro. Dynamic ESA. Riding mode Pro. High rider’s seat (830 mm / 850 mm; 32.7 / 33.5 inches). Low rider’s seat (760 mm / 780 mm; 29.9 / 30.7 inches). Hill Start Control. Central locking with anti-theft alarm system. Headlight Pro (LED Corona Rings). Preparation for navigation device. Adjustable Seat heating (five levels for rider, two levels for pillion). Audio system (Bluetooth, USB/MP3, Apple iPod). Tire Pressure Monitor (TPM). Second power socket. Chromed exhaust. Cruise control, up to 210 km/h (130 mph) depending on gear. Accessories. Storage options. Impact protection for system pannier, left/right. Protective film for system pannier, left/right. Inner bag for system pannier, left/right. Touring topcase in White aluminium metallic matt (for models with optional central locking). Additional brake light for touring topcase (for models with optional central locking). Touring topcase in Light white aluminium metallic matt (without electrics). Inner bag for touring topcase. Storage compartment for touring topcase. Small topcase. Inner bag for small topcase. Softbag, small/large. Luggage roll. Tank bag. Design. Chrome pannier trim strips. Chromed topcase lid trim. Chromed silencer. Sound. Akrapovic sport silencer (Muffler). Ergonomics and comfort. Gear Shift Assistant Pro. High rider’s seat (830 mm / 850 mm; 32.7 / 33.5 inches). Low rider’s seat (760 mm / 780 mm; 29.9 / 30.7 inches). Comfort windshield. Heated rider’s seat. Heated rider’s seat, low. Heated rider’s seat, high. Heated pillion seat. Navigation and comfort. BMW Motorrad Navigator V. Apple iPod adapter cable. Safety and security. Basic anti-theft alarm system (without central locking). Safety plug for oil filler neck. Cylinder head cover protection. LED auxiliary headlight. Hill Start Control. Riding mode Pro. Tire Pressure Monitor (TPM). Cruise control. First aid kit.
A “press release” is promotional text issued by a rider, team, company or organization to inform the public about an event, product, or service from the issuer’s own point of view, and if deemed to have news value, may be placed on roadracingworld.com as a service to our readers.
A press release is not an article written by Roadracingworld.com staffers. When a post is labeled with the words “press release”, it means that Roadracingworld.com is not responsible for its content and that Roadracingworld.com makes no guarantee that it is accurate. Not all press releases are posted and Roadracingworld.com may reject press releases if the content is too heavy on commercial promotion with little or no news value or if the press release contains obvious errors.
Stainless Steel Coiled Tube, Stainless Steel Polishing Tube - Sihe,https://www.tjtgsteel.com/