IntroductionSpecification Comparison      Material      Manufacture      Dimensional Tolerances           Wall Thickness           Outside Diameter      Surface Finish      Weld Bead      Heat Treatment      Mechanical Properties      Non-Destructive InspectionWhich Specification

This article provides the alternative specifications for the Australian food industry service. Such specifications include:

ASTM A269 “Specification for seamless and welded austenitic stainless steel tubing for general service”

ASTM A249 “Specification for welded austenitic steel boiler, super heater, heat exchanger, and condenser tubes”

AS1528 was revised in 2001 by key stakeholders in the Australian food manufacturing and tube industries. AS 1528 is unique, in that it covers all the associated fittings in addition to the tube.

All specifications pertain to common grades, such as grades 304, 304L, 316 and 316L. AS1528.1 covers all grades of duplex and austenitic stainless steel listed in ASTM A240.

All specifications need fusion-welded products without filler metals. Specifications such as ASTM A270, ASTM A269 and AS 1528 also cover seamless products.



AS 1528 specifies nominal thicknesses of 1.6mm for all outside diameters, (ODs) except 2 mm for 203.2 mm OD; other thicknesses can be specified by purchasers. Standard tolerance is +nil, -0.10mm. The all-minus tolerance recognizes the usual practice for tube, to all specifications, to be produced towards the lower limit of the tolerance range. A range of between 1.52 and 1.58 mm is typical. This tolerance also applies to tube fittings.

* ASTM A554 tolerances for the weld bead removed condition. * AS1528 also covers OD sizes 12.7, 19.0, 31.8, 127.0, 152.4 and 203.2mm

All these tube specifications provide limits for wall thickness and OD. The inside diameters are not mentioned separately.

The surface finish properties of various specifications, recommended for Australian food industry services, are as follows:

The handling products used in the food industry require a tube without weld bead remnant on the inner surface.

The mechanical properties of various stainless steel grades, commonly used in food industries, are given below:

AZoMaterials spoke to Bill Stry Ph.D., Senior Process Technology Engineer at Harper International, about the how carbon fiber oxidation processing works, the industrial applications, and what makes Harper's oxidation oven technology unique.

In this interview, Ian Doggett, Global Compliance Manager at Goodfellow, talks to AZoM about the many aspects that the compliance department has to withstand.

In this interview AZoM talks to Rohit Ramnath, Senior Product Engineer from Master Bond, about the benefits of LED curing adhesives.

This page details the capabilities of the TESCAN CoreTOM, a multi-resolution micro-CT system optimized for geoscience applications.

This page details the capabilities of the MCR Powder Shear Cell, used for advanced true powder rheology.

The CAVILUX HF pulsed diode laser light source is ideal for use with high-speed camera both for industry and research and development.

316l Stainless Tubing

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Stainless Seamless Tube, High Pressure Tubes, Heat Exchanger Tubes - Dextube,https://www.shdextube.com/